Development of wide one-dimensional X-ray line sensor in backscatter X-ray imaging system for infrastructure inspection
-
- Ohashi Kazuya
- Nagoya University
-
- Watanabe Kenichi
- Nagoya University
-
- Yamazaki Atsushi
- Nagoya University
-
- Uritani Akira
- Nagoya University
-
- Toyokawa Hiroyuki
- National Institute of Advanced Industrial Science and Technology
-
- Fujiwara Takeshi
- National Institute of Advanced Industrial Science and Technology
-
- Mandai Shinichi
- BEAMX Corporation
-
- Isa Hidenori
- BEAMX Corporation
この論文をさがす
抄録
We fabricated a wide one-dimensional X-ray line sensor in backscatter X-ray imaging system. The length and width of the sensitive area of our line sensor is 200 mm and 50 mm, respectively. By using fan-beam X-rays and scanning in the perpendicular direction to the fan-beam plane, two-dimensional backscatter X-ray images can be obtained. In basic experiments, we confirmed that an iron rod placed at the depth of, at least, 9 cm in a concrete brock can be seen by combining our line sensor and C-band linac X-ray generator.
収録刊行物
-
- Progress in Nuclear Science and Technology
-
Progress in Nuclear Science and Technology 6 (0), 208-211, 2019-01-31
Atomic Energy Society of Japan
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001288125952384
-
- NII論文ID
- 40021812347
-
- NII書誌ID
- AA12785802
-
- NDL書誌ID
- 029521512
-
- ISSN
- 21854823
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可
