書誌事項
- タイトル別名
-
- Proposal of “Soft-machining” as a High-precision Drilling Method for hard plastic materials
- :ソフトマシニングの提案
説明
<p>Applicability of “soft-machining” method for drilling fine holes on CFRP and acrylic sheets were experimentally examined. The “soft-machining” is a high-precision machining method for CFRP developed by authors. In the soft-machining, a constant load P applied on the cutting tool becomes the driving force to feed the cutting edge. The drilling of CFRP showed that the applying load P has a strong relation with the maximum cutting force and cutting damage generation. If the applying load P was less than 53N, there was no apparent cutting damage on the drilling surface. In addition, the soft-machining can extend the service life of drill even in the high-speed steel drill. The drilling of acrylic sheet by soft-machining showed a good performance, no sudden temperature rising and cutting resistance fluctuation, during the machining,</p>
収録刊行物
-
- 機械材料・材料加工技術講演会講演論文集
-
機械材料・材料加工技術講演会講演論文集 2018.26 (0), 903-, 2018
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001288140505344
-
- NII論文ID
- 130007653931
-
- ISSN
- 2424287X
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可