Three-Dimensional Morphology of C15-Al₂Ca Precipitates in a Mg-Al-Ca Alloy

  • Kashiwase Sakiko
    Department of Materials Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology
  • Unekawa Mariko
    Department of Materials Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology
  • Hisazawa Hiromu
    Graduate School of Technology, Industrial and Social Sciences, Tokushima University
  • Terada Yoshihiro
    Department of Materials Science and Engineering, School of Materials and Chemical Technology, Tokyo Institute of Technology

書誌事項

タイトル別名
  • Three-Dimensional Morphology of C15–Al<sub>2</sub>Ca Precipitates in a Mg–Al–Ca Alloy

この論文をさがす

説明

<p>The three-dimensional morphology and thickness of an Al2Ca Laves phase with a C15 crystal structure, which precipitated within the primary α-Mg grain of a Mg–5Al–1.5Ca alloy that had been over-aged at 523 K for 100 h, were investigated using high-resolution transmission electron microscopy. The C15–Al2Ca precipitate exhibits a hexagonal plate-like morphology, with a planar surface parallel to the (0001)α basal plane and the sides of the hexagonal plate parallel to the {1120} second columnar plane of the α matrix. A typical coffee bean contrast was clearly visible around the precipitate, which is indicative of the coherent precipitation of the C15–Al2Ca phase with respect to the α-Mg matrix. The thickness of the Al2Ca precipitate, which corresponds to six layers of the (111)C15 plane composed of Ca atoms, was evaluated as approximately 1.5 nm.</p><p> </p><p>This Paper was Originally Published in Japanese in J. Japan Inst. Met. Mater. 83 (2019) 193–197.</p>

収録刊行物

  • MATERIALS TRANSACTIONS

    MATERIALS TRANSACTIONS 60 (9), 2048-2052, 2019-09-01

    公益社団法人 日本金属学会

被引用文献 (9)*注記

もっと見る

参考文献 (16)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ