Effect of Curing Conditions on Strength for CFRP Single Lap Adhesive Joint Using Epoxy Resin Adhesive

DOI Web Site Web Site 2 References
  • KOBAYASHI Satoshi
    Department of Mechanical Systems Engineering, Tokyo Metropolitan University
  • YANAGISAWA Kotono
    Department of Mechanical Systems Engineering, Tokyo Metropolitan University
  • OSADA Toshiko
    Department of Mechanical Systems Engineering, Tokyo Metropolitan University

Bibliographic Information

Other Title
  • エポキシ樹脂接着剤を用いた炭素繊維強化プラスチックシングルラップ接着継手の強度に及ぼす硬化条件の影響
  • エポキシ ジュシ セッチャクザイ オ モチイタ タンソ センイ キョウカ プラスチックシングルラップ セッチャク ツギテ ノ キョウド ニ オヨボス コウカ ジョウケン ノ エイキョウ

Search this article

Abstract

<p>The application of carbon fiber reinforced plastics (CFRP) to airframes has been expanding to reduce weight of aircraft. In addition, by replacing mechanical fastening with adhesive bonding, it is possible to achieve further weight saving of the airframe. In this study, we investigated the effect of curing conditions on the strength of CFRP single lap adhesive joint using epoxy resin adhesive. Specimens with different curing conditions such as curing temperature and curing time were prepared. The reaction ratio of the adhesive samples under each curing condition was evaluated by differential scanning calorimetry (DSC) measurements. Further, tensile shear adhesive strength and failure process of the joints were evaluated by performing tensile shear tests and acoustic emission (AE) measurements on specimens. After the test, failure mode was distinguished by observing the failure surface. From the above, the relationship among the reaction ratio of the adhesive, the strength of the joint and the failure mode was clarified.</p>

Journal

References(2)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top