浸炭焼入れしたSAE4320鋼における内部起点剥離寿命に及ぼす残留オーステナイトの影響

DOI DOI Web Site Web Site Web Site 被引用文献4件 参考文献18件 オープンアクセス
  • Kanetani Kohei
    Material R&D Dept., JTEKT Corporation Graduate School of Natural Science and Technology, Kanazawa University
  • Mikami Tsuyoshi
    Material R&D Dept., JTEKT Corporation
  • Ushioda Kohsaku
    Graduate School of Natural Science and Technology, Kanazawa University

書誌事項

タイトル別名
  • Effect of Retained Austenite on Sub-surface Initiated Spalling during Rolling Contact Fatigue in Carburized SAE4320 Steel
  • シンタン ヤキイレ シタ SAE4320コウ ニ オケル ナイブ キテン ハクリ ジュミョウ ニ オヨボス ザンリュウ オーステナイト ノ エイキョウ

この論文をさがす

説明

<p>The effect of retained austenite (γR) on the rolling contact fatigue (RCF) properties of carburized SAE4320 steel was carefully investigated. We prepared specimens comprising four volume fractions of γR from 6% to 39% by controlling the subzero heat treatment. The effect of γR on the RCF was investigated using hardness measurements, X-ray diffraction, scanning electron microscopy (SEM), and transmission electron microscopy. The RCF test revealed that the sub-surface initiated spalling life was prolonged as the volume fraction of γR increased. In the area at the depth z0 where the orthogonal shear stress was maximum, the majority of the γR was transformed to martensite, thus resulting in a significant increase in the Vickers hardness. The result of SEM observation showed that the region initially comprising γR exhibited a high resistance to RCF. Moreover, the TEM analysis revealed that the initial γR region changed into a mixture of very fine hard martensite and some unchanged γR during RCF. This suggests that the transformation of γR into fine hard martensite during RCF contributed to the improvement of the RCF life.</p>

収録刊行物

被引用文献 (4)*注記

もっと見る

参考文献 (18)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ