ノズル出口に設置した鋸歯状タブの位置がアスペクト比2の長方形噴流の流れ特性に与える影響

DOI Web Site 被引用文献2件 参考文献3件

書誌事項

タイトル別名
  • The influence of the installation position of serrated tabs on the flow characteristics of a 2:1 rectangular jet

抄録

<p>The effect of the installation position of serrated tabs on the flow characteristics of a rectangular jet was studied experimentally. The serrated tabs, i.e. flat tabs of delta configuration, were placed on the short, long or both sides of a 2:1 rectangular nozzle. Measurements of mean and fluctuating velocities were made with cross– and single–wire probes for Reynolds number based on the height of nozzle of 9,000. In the case of the rectangular jet with tabs placed on the short sides, the y–axis spread of jet increases more than the z–axis spread of jet, and the intersection point of axis–switching get closer to the nozzle exit than the jet without tabs. On the other hand, in the case of the rectangular jet with tabs placed on the long sides, the y–axis spread of jet decreases less than the z–axis spread of jet, and the intersection point of axis–switching moves farther from the nozzle exit than the jet without tabs. Moreover, in the case of the rectangular jet with tabs in both sides, the intersection point of axis–switching moves between that of jet with tabs placed on both short and tabs placed long sides. Therefore, the installation position of serrated tabs at a 2:1rectangular nozzle exit significantly affects the development of rectangular jet.</p>

収録刊行物

被引用文献 (2)*注記

もっと見る

参考文献 (3)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ