旋回流式マイクロバブル発生器の性能向上

DOI Web Site Web Site 参考文献5件

書誌事項

タイトル別名
  • Performance Improvement of Swirl Type Micro Bubble Generator
  • 旋回流式マイクロバブル発生器の性能向上(第2報)解析による渦流室入口径が気泡径に及ぼす影響
  • センカイリュウシキ マイクロバブル ハッセイキ ノ セイノウ コウジョウ(ダイ2ホウ)カイセキ ニ ヨル カリュウシツイリグチケイ ガ キホウケイ ニ オヨボス エイキョウ
  • (2<sup>nd</sup> Report: Effect of Inlet Diameter of Swirl Chamber on Bubble Diameter by Analysis)
  • （第２報：解析による渦流室入口径が気泡径に及ぼす影響）

この論文をさがす

抄録

<p>Micro bubbles measuring tens of micrometers or less in diameter have recently been paid much attention. Swirl-type, pressurizing dissolution, and perforated plate methods have been proposed for micro bubble generation. The swirl-type method can generate micro bubbles even under low-pressure power in a simple structure. The enlarged inlet diameter of the swirl chamber can reduce the average bubble diameter. This study examined the effect of the swirl chamber inlet diameter on the flow around chamber outlet in a swirl-type micro bubble generator by numerical analysis. The Inlet diameter of the swirl chamber was changed to 30 mm, 60 mm, and 90 mm, the flow velocity distribution and the wall shear stress around the chamber outlet were calculated. As a result, when the inlet diameter of the swirl chamber was enlarged, it was clarified that the circumferential flow velocity and the wall shear stress around the chamber outlet increased, which reduced the average bubble diameter.</p>

収録刊行物

  • 混相流

    混相流 34 (3), 427-435, 2020-07-31

    日本混相流学会

参考文献 (5)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ