信号と電力の両方を伝送可能なSAWフィルタを用いたゲート駆動回路

書誌事項

タイトル別名
  • Gate Drive Circuit Using SAW Filter Capable of Power and Signal Transmissions
  • シンゴウ ト デンリョク ノ リョウホウ オ デンソウ カノウ ナ SAW フィルタ オ モチイタ ゲート クドウ カイロ

この論文をさがす

抄録

<p>In power converter circuits, a gate drive circuit is connected to the power devices for the switching operation. The gate drive circuit transmits both signal and power to the power devices, simultaneously. At present, multi-level converter circuits using large numbers of devices have been proposed for power electronics circuits, but these are complicated to implement in a circuit. Hence, simplification of the signal and power transmissions of the gate drive circuit is required for circuit implementations. This paper proposes a gate drive circuit using SAW (Surface Acoustic Wave) devices that can transmit signal and power to the power devices, simultaneously. To use the several-hundreds MHz signal output from the SAW filter as the gate signal, this paper presents the design procedure for the internal parameters of the detection circuit that demodulates the signal into a several kHz signal. The usefulness of the proposed design is demonstrated by experimental evaluation of a half-bridge inverter and gate drive circuit with SAW filters.</p>

収録刊行物

参考文献 (11)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報

問題の指摘

ページトップへ