炭化ケイ素同士のメカニカルシール型面接触における水中低摩擦発現(第1報)

書誌事項

タイトル別名
  • Low Friction in Mechanical Seal of SiC Sliding against Itself in Water (Part 1)
  • 炭化ケイ素同士のメカニカルシール型面接触における水中低摩擦発現(第1報)すべり軸受型面接触との相違
  • タンカ ケイソ ドウシ ノ メカニカルシールガタメン セッショク ニ オケル ミズ ナカビク マサツ ハツゲン(ダイ1ポウ)スベリ ジクウケガタメン セッショク ト ノ ソウイ
  • ―Differences from Sliding Bearing Plane Contact―
  • ―すべり軸受型面接触との相違―

この論文をさがす

抄録

<p>In recent years, reduction of frictional energy loss at sliding surfaces is required for mechanical seals to prevent leakage of seal liquid. However, it was not easy for the complicated frictional phenomena of mechanical seal because of difficulty of removing the wear products from the sliding surface and supplying lubricant to the sliding surface. In this paper, SiC (silicon carbide) plane contact frictional tests were carried out with mechanical seal type and bearing type in water. Low friction coefficient of 0.05 or less was achieved under boundary lubrication with mechanical seal type, and the behavior of the friction coefficient during the running-in process was significantly different from that of the bearing type. Compared to the bearing type, the low friction of the mechanical seal type generated under more limited friction conditions. The low-friction sliding surface was smooth surface with a 4 nm thick nano-interface and the deposition of wear products composed of carbon, oxygen and silicon in the pores. It was found that the wettability of low friction sliding surface was better than that of sliding surface of running-in, and good wettability leads to a lower friction coefficient.</p>

収録刊行物

  • トライボロジスト

    トライボロジスト 66 (9), 706-715, 2021-09-15

    一般社団法人 日本トライボロジー学会

詳細情報 詳細情報について

問題の指摘

ページトップへ