強圧延Cu–Ti–Co合金の低温時効による組織制御と機械的性質の変化に及ぼすAg添加の影響

  • 三浦 博己
    豊橋技術科学大学 機械工学系
  • 小林 正和
    豊橋技術科学大学 機械工学系
  • 伊藤 優樹
    三菱マテリアル株式会社 中央研究所
  • 森 広行
    三菱マテリアル株式会社 高機能製品カンパニー 三宝製作所 開発部
  • 牧 一誠
    三菱マテリアル株式会社 中央研究所

書誌事項

タイトル別名
  • Effects of Ag Addition on Microstructural Control and Changes in Mechanical Properties of Heavily Cold–Rolled Cu–Ti–Co Alloys by Low–Temperature Aging
  • キョウアツエン Cu-Ti-CO ゴウキン ノ テイオン ジコウ ニ ヨル ソシキ セイギョ ト キカイテキ セイシツ ノ ヘンカ ニ オヨボス Ag テンカ ノ エイキョウ

この論文をさがす

抄録

<p>Low Ti content Cu–Ti alloys with small additions of Co and Ag, i.e., Cu–Ti–Co and Cu–Ti–Co–Ag alloys, were heavily cold rolled. A typical lamellar structure as well as heterogeneous–nano one was developed in both alloys. Increment of the lamellar spacing during low temperature aging was effectively suppressed by Ag addition. Both alloys exhibited well–balanced properties of tensile strength over 1 GPa, ductility over 10% and electrical conductivity over 20%IACS were achieved after peak aging, all which exceeded those of the commercial Cu–Ti alloys with relatively higher concentrations of Ti. However, Ag addition more emphasized the above properties. These specific properties attributed to the heterogeneous–nano structure which induced matrix strengthening and homogeneous precipitation instead of Spinodal decomposition.</p>

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ