Proposal of Virtual Transformer-based Back-to-Back Asynchronous Loss Measurement using a Single Set of Measurement Instruments for One Inverter and Experimental Verification
-
- Kawamura Atsuo
- Department of Electrical and Computer Engineering, Yokohama National University
-
- Nasu Yoshiki
- Department of Electrical and Computer Engineering, Yokohama National University
-
- Miguchi Yasuhiko
- Department of Electrical and Computer Engineering, Yokohama National University
-
- Setiadi Hadi
- Department of Electrical and Computer Engineering, Yokohama National University
-
- Obara Hidemine
- Department of Electrical and Computer Engineering, Yokohama National University
この論文をさがす
説明
<p>In this study, a virtual transformer-based loss measurement method is proposed for inverter power conversion efficiency measurements, and the accuracy of this method is theoretically analyzed. This concept is further extended to a practical measurement procedure, wherein asynchronous loss measurements are conducted for powering and regenerating operations using a single set of measurement instruments. The average efficiency can be obtained with a very high accuracy after calibration of the measurement instruments. A high-efficiency system inverter was selected as the converter under test, and its efficiency and accuracy were experimentally measured and validated. An efficiency of 99.75% ± 0.006% was obtained at an output of 1600W.</p>
収録刊行物
-
- IEEJ Journal of Industry Applications
-
IEEJ Journal of Industry Applications 11 (1), 175-184, 2022-01-01
一般社団法人 電気学会