長方形ノズル四隅にテーパ三角形管を付加した自由噴流の流れ特性と渦構造

DOI Web Site 参考文献9件 オープンアクセス
  • 大内 理功
    金沢大学大学院 自然科学研究科 機械科学専攻 （株）デンソー 熱マネシステム開発部
  • 木綿 隆弘
    金沢大学 理工研究域 機械工学系
  • 河野 孝昭
    金沢大学 理工研究域 機械工学系
  • 梶谷 尚希
    金沢大学大学院 自然科学研究科 機械科学専攻
  • 寺本 裕志
    石川工業高等専門学校 機械工学科

書誌事項

タイトル別名
  • Flow characteristics and vortical structures of a free jet issuing from rectangular nozzle with four tapered triangular tubes

抄録

<p>The purpose of this study is to clarify the effect of the tapered triangular tubes added to the four corners of a 2:1 rectangular nozzle on the flow characteristics and vortical structures of a rectangular jet. The angles of tapered triangular tubes were changed α = +6° and −6°. The mean bulk velocity U0 from the nozzle exit was about 4.5 m/s. The Reynolds number Re (= U0H/ν; ν, kinematic viscosity of air) of the jet was 9,000. In the case of the jet without tapered triangular tubes, the three–dimensional deformation of the vortex ring produces strong positive and negative vorticity around each axis and also increases the turbulent kinetic energy at the jet corners. The spread of the jet is larger than that of other jets. In the case of jet with divergent tapered triangular tubes with α = +6°, the local vorticity and turbulent kinetic energy increase at the corners of the jet were suppressed and the profile followed the jet shape. As a result, the jet becomes a circular jet shape until relatively downstream, and the jet spread was smaller than that of the other jets. On the other hand, in the case of the jet with convergent tapered triangular tubes with α = −6°, the jet maintains a relatively rectangular jet shape upstream due to the local increase in vorticity on the long side of the nozzle and the increase in turbulent kinetic energy along the nozzle shape. However, the overall spread of the jet is almost the same as that without the tapered triangle tubes due to the diffusion of the jet along the nozzle span length. Therefore, it is possible to change the flow characteristics and vortical structures of the rectangular jet by adding tapered triangular tubes with different angles.</p>

収録刊行物

参考文献 (9)*注記

もっと見る

関連プロジェクト

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ