Three-dimensional Quantitative Evaluation of the Lamellar Curvature in Pearlitic Steel Based on an Orientation Analysis of Cementite
-
- Kosaka Makoto
- Nippon Steel
-
- Ushioda Kohsaku
- Nippon Steel Research Institute
-
- Teshima Toshihiko
- Nippon Steel
-
- Nishida Minoru
- Kyushu University
-
- Hata Satoshi
- Kyushu University
Description
<p>To quantitatively evaluate the three-dimensional lamellar curvature in pearlitic steel, the crystallographic orientation rotation of ferrite and cementite was analyzed using scanning electron microscopy and electron backscattering diffraction. In the hypereutectoid steel containing 0.92% C, 0.30% Mn, 0.20% Si, and 0.19% Cr, the ferrite–cementite interfaces in some colonies were confirmed to match well with those having frequently observed habit planes with the Pitsch–Petch orientation relationship. It was also confirmed that the ferrite and cementite near the ferrite–cementite interface rotated toward the same orientation to maintain the Pitsch–Petch orientation relationship and the habit plane. Based on the confirmation that the ferrite–cementite interface is well approximated by (010) plane of the adjacent cementite, the lamellae were revealed to have three-dimensional anisotropic curvature.</p>
Journal
-
- ISIJ International
-
ISIJ International 62 (2), 299-306, 2022-02-15
The Iron and Steel Institute of Japan
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390009640045246080
-
- NII Article ID
- 130008160452
-
- ISSN
- 13475460
- 09151559
-
- Text Lang
- en
-
- Data Source
-
- JaLC
- Crossref
- CiNii Articles
- KAKEN
- OpenAIRE
-
- Abstract License Flag
- Disallowed