電解を複合した磁気研磨法によるアルミニウム合金の表面仕上げに関する研究

DOI

書誌事項

タイトル別名
  • Study on surface finishing by magnetic abrasive finishing combined with electrolytic process for aluminum alloy A5052

抄録

<p>The EMAF (Magnetic Abrasive Finishing combined with Electrolytic) process was proposed in order to improve the finishing efficiency of traditional MAF (Magnetic Abrasive Finishing) process. For the purpose of making EMAF process more widely used in industry, the machining mechanism of the EMAF process for finishing Aluminum Alloy A5052 has been discussed in this paper. In the experimental part, firstly the finishing effect of electrolytic reaction and MAF process in EMAF process are explored respectively. Then the compound EMAF processing experimental is conducted. The processing stability of the EMAF process is evaluated by the measured processing current value curve. By adjusting the amount of iron powder to improve the EMAF processing stability, and the occurrence of short circuits can be avoid effectively. In this study, the best experimental results were obtained when using the electrolytic iron powder of 330 μm (in mean diameter) and the amount of 0.5 g.</p>

収録刊行物

詳細情報 詳細情報について

  • CRID
    1390010292564825984
  • DOI
    10.11522/pscjspe.2021a.0_95
  • 本文言語コード
    en
  • データソース種別
    • JaLC
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ