STUDY ON THE PROCESS OF THE CORROSION- INDUCED CRACK, DELAMINATION AND SPALLING ON RC WALL WITH MORTAR FINISH
-
- TSUCHIYA Naoko
- Material and Components Standards Division, Dept. of Building, National Institute for Land and Infrastructure Management
-
- NAKADA Kiyofumi
- Dept. of Building Materials and Components, Building Research Institute
-
- IKAWA Norihiro
- Hachiyo consultant Co.,Ltd.
-
- YOKOYAMA Hiroshi
- Hachiyo consultant Co.,Ltd.
-
- MISHIMA Naoki
- Material and Components Standards Division, Dept. of Building, National Institute for Land and Infrastructure Management
-
- MATSUZAWA Koichi
- Dept. of Building Materials and Components, Building Research Institute
-
- KAGE Tadatsugu
- Dept. of Building Materials and Components, Building Research Institute
-
- TANANO Hiroyuki
- Dept. of Building Materials and Components, Building Research Institute
Bibliographic Information
- Other Title
-
- モルタル仕上げのあるRC壁部材表面において確認される鉄筋腐食を原因とするひび割れ,浮き・剥離の顕在化過程に関する研究
Abstract
<p>For the purpose to study about the characteristics of the process of the corrosion-induced deterioration detected on surface of RC wall with mortar finish, RC wall specimens were electrified and measured the amount of the deteriorations as crack, delamination and spalling by hammer and visual examination periodically. From the results, in the case the cover thickness was small, the delamination increased with the progress of the rebar corrosion, which behavior were not liner but agogics. And in the case the cover thickness was large, the cracks along the rebar increased on mortar surface with the progress of the rebar corrosion.</p>
Journal
-
- Journal of Structural and Construction Engineering (Transactions of AIJ)
-
Journal of Structural and Construction Engineering (Transactions of AIJ) 87 (799), 854-865, 2022-09-01
Architectural Institute of Japan
- Tweet
Details 詳細情報について
-
- CRID
- 1390011793672054528
-
- ISSN
- 18818153
- 13404202
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- Crossref
-
- Abstract License Flag
- Disallowed