光造形アディティブ・マニュファクチャリングによる金属製構造体の作製

DOI Web Site 参考文献16件

書誌事項

タイトル別名
  • Development of Metal Structures by Stereolithographic Additive Manufacturing

抄録

In stereolithographic additive manufacturing （STL-AM）, 2-D cross sections were created through photo polymerization by UV laser drawing on spread resin paste including nanoparticles, and 3-D models were sterically printed by layer lamination. The lithography system has been developed to obtain bulky components with functional geometries. As the row material of the 3-D printing, fine metal particles were dispersed into acrylic liquid resins at about 60% in volume fraction. These materials were mixed and deformed to obtain thixotropic slurry. The resin paste was spread on a glass substrate with 50 μm in layer thickness by a mechanically moved knife edge. An ultraviolet laser beam of 355 nm in wavelength was adjusted to 50 μm in variable diameter and scanned on the spread resin surface. The composite precursors including nanoparticles were dewaxed and sintered in the air atmosphere. Through computer-aided smart manufacturing, design, and evaluation （Smart MADE）, practical material components were fabricated to modulate energy and material transfers in potential fields between human societies and natural environments as active contributions to Sustainable Development Goals （SDGs）.

収録刊行物

  • Journal of Smart Processing

    Journal of Smart Processing 11 (4), 171-174, 2022-07-10

    一般社団法人 スマートプロセス学会 （旧高温学会）

参考文献 (16)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ