Foam-Eliminatory Purge-and-Trap Technique Using a Functional PTFE Membrane and Needle-Type Extraction Device to Determine Flavors in Drink Samples

  • UETA Ikuo
    Department of Applied Chemistry, University of Yamanashi
  • MAKABE Hiroto
    Department of Applied Chemistry, University of Yamanashi
  • MASUDA Suguru
    Department of Applied Chemistry, University of Yamanashi
  • NAKAGAMI Koki
    Department of Applied Chemistry and Life Science, Toyohashi University of Technology
  • SAITO Yoshihiro
    Department of Applied Chemistry and Life Science, Toyohashi University of Technology

この論文をさがす

抄録

<p>A simple and sensitive method for determining flavor compounds in foamable liquid samples was developed using the purge-and-trap method with the addition of glass wool and a functional porous polytetrafluoroethylene (PTFE) membrane. Flavor compounds purged from sample solutions were trapped by a needle-type extraction device. The functional PTFE membrane, which retained the aqueous sample while allowing purge gas to pass, was fixed on a glass solid-phase extraction cartridge. Hence, purge gas was continuously introduced into the sample solution from the bottom of the cartridge. To trap the foam, 0.4 g of glass wool was fixed in the sample headspace, and headspace gas was collected using a needle-type extraction device placed on the upper side of the wool. During the purge process, although foam climbed through the cartridge, it was adsorbed on the glass wool. However, the flavor compounds were not adsorbed on the inactive glass wool surface as confirmed in this study. This method does not require the dilution of sample solutions or the adding of antifoam agents to sample solutions. This simple and inexpensive construction enables the sensitive detection of flavor compounds. </p>

収録刊行物

  • CHROMATOGRAPHY

    CHROMATOGRAPHY 44 (3), 133-137, 2023-10-20

    クロマトグラフィー科学会

参考文献 (11)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ