In-situ Observation of Fatigue Crack Propagation in Soda-Lime Glass with Vickers Indentation-Induced Initial Crack under Bending
-
- KOMINE Hibiki
- Department of Engineering, Graduate School of Integrated Science and Technology, Shizuoka University
-
- FUJITA Keisuke
- JSPS Research Fellow, Educational Division, Graduate School of Science and Technology, Shizuoka University
-
- NIWA Akifumi
- Evaluation Science Team Common Base Technology Division Innovative Technology Laboratories, AGC Inc.
-
- KOBAYASHI Yusuke
- Evaluation Science Team Common Base Technology Division Innovative Technology Laboratories, AGC Inc.
-
- SATO Yosuke
- Evaluation Science Team Common Base Technology Division Innovative Technology Laboratories, AGC Inc.
-
- KURODA Ryunosuke
- Evaluation Science Team Common Base Technology Division Innovative Technology Laboratories, AGC Inc.
-
- KIKUCHI Shoichi
- Department of Mechanical Engineering, Faculty of Engineering, Shizuoka University
Bibliographic Information
- Other Title
-
- ビッカース圧子により導入した初期き裂を有するソーダライムガラスの曲げ疲労き裂進展その場観察
Abstract
<p>Small cracks propagate at the glass surface due to the combined effects of water vapor and applied load. This phenomenon is known as glass fatigue. In this study, four-point bending fatigue tests under static and cyclic loading conditions were conducted for the soda-lime glass plate specimens with the initial crack and indentation pit induced by Vickers diamond indentation. Fatigue cracks were observed by the in-situ crack observation system using optical microscopy in order to obtain the relationship between crack growth rate, da/dt, and maximum stress intensity factor, Kmax, during fatigue tests. The da/dt decreased and then increased with the Kmax value. In addition, photoelasticity was applied to measure the residual stress distribution generated on the surface of the glass. The results showed that the da/dt at the early stage varied with indentation load due to the residual stress, whereas the effect of the indentation load on the da/dt was not observed in the region without residual stress.</p>
Journal
-
- Journal of the Society of Materials Science, Japan
-
Journal of the Society of Materials Science, Japan 72 (12), 866-872, 2023-12-15
The Society of Materials Science, Japan
- Tweet
Details 詳細情報について
-
- CRID
- 1390017046607437056
-
- ISSN
- 18807488
- 05145163
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- Crossref
-
- Abstract License Flag
- Disallowed