o-ヒドロキシヒドロキノンフタレインを用いる鉄(III)及びアルミニウム(III)の吸光光度定量

DOI NDLデジタルコレクション Web Site Web Site 被引用文献5件

書誌事項

タイトル別名
  • キサンテン系誘導体の分析化学への利用　Ｉ　　ｏ‐ヒドロキシヒドロキノンフタレインを用いる鉄（ＩＩＩ）およびアルミニウム（ＩＩＩ）の吸光光度定量
  • Spectrophotometric determination of Fe (III) and A1(III) with ο-hydroxyhydroquinonephthalein
  • オミクロン ヒドロキシヒドロキノンフタレイン オ モチイル テツ 3 オヨビ
  • キサンテン系誘導体の分析化学への利用(第1報)

この論文をさがす

説明

The spectrophotometric method for the determination of Fe (III) and Al (III) by using ο-hydroxyhydroquinonephthalein (HyPh) was devised and those metals in the presence of each other were also determined. To the solution containing less than 3.3μg of Fe (III), 3.0 ml of phosphate buffer (pH 8.8) and 1.0 ml of 5.0×10-4M HyPh methanol solution were added and the whole volume was made up to 10 ml with distilled water. The solution was kept at 60°C for 30 minutes and then cooled for 15 minutes and then, the absorbance of it was measured at 605 nm or 620 nm taking the distilled water as the reference. Determination of Al(III) was carried out in the same manner as above with a slight modification that the reaction mixture was left to stand at (2025)°C for 20 minutes and the absorbance was measured at 530 nm against the reagent blank. The concentration of Fe (III) in the presence of Al (III) was determined by using the absorbance at 620 nm against distilled water. The calibration curves were linear in the range of 0 to 3.3 μg/ 10 ml of Fe (III) and 0 to 3.2 μg/10ml of Al(III). According to the Sandell's expression, the sensitivities were 0.0003 μg/cm2(605nm), 0.0004 μg/cm2(620nm)of Fe(III)and 0.0002μg/cm2 (530nm)of Al(III) for an absorbance of 0.001, respectively.

収録刊行物

  • 分析化学

    分析化学 24 (4), 253-256, 1975

    公益社団法人 日本分析化学会

被引用文献 (5)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ