中型電子計算機による解析ブロック航空三角測量システム

森戸 博

doi:10.4287/jsprs1962.9.4_14

書誌事項

タイトル別名

Analytical Block Aerial Triangulation System by Medium Computer

説明

This paper describes analytical block aerial triangulation system developed by our firm. We are confident of high practicability on our systems. We defined practicabilities as follows; 1) All of operations concerning aerial triangulation are to be symplified, automatically worked and moreover each system function is to be worked systematically. 2) Whole system should be superior to non-block method as to economy and accuracy. 3) Computer size to be used should be selected considering payability. Aiming to meet with practicabilities above, the key procedure described here is to solve by least square method simultaneously two conditional equations; one to determine absolute condition using control points included in a block and another to determine relative condition between course using tie points, in the stage of conversion from strip coordinates in aerial triangulation to geodetic coordinates. Instrumentations used are Zeiss Stereocomparator and Japanese made computer “TOSBAC-3400”.

収録刊行物

写真測量

写真測量 9 (4), 14-20, 1970

社団法人日本写真測量学会

詳細情報詳細情報について

CRID: 1390282679053147904

NII論文ID: 130004371180

DOI: 10.4287/jsprs1962.9.4_14

ISSN: 18843980; 05494451

データソース種別

JaLC
Crossref
CiNii Articles

抄録ライセンスフラグ: 使用不可

書き出し

問題の指摘