切欠をもつ鋼材の破壊遷移現象と破壊overall strainに及ぼす諸因子の影響

DOI NDLデジタルコレクション Web Site

書誌事項

タイトル別名
  • Fracture Transition Behaviors and Fracture Overall Strain of Low Carbon Steel Plate with Notch
  • キリカキ オ モツ コウザイ ノ ハカイ センイ ゲンショウ ト ハカイ ov

この論文をさがす

抄録

In order to ensure the welded structure of low strength steel from the unstable brittle fracture at room temperature, the unstable fracture beyond general yielhing should be prevented. In this paper, the new material criterion, named “Strain Criterion”, based on the ductility of the structural element with defects is proposed for this fracture. Experimental studies on the effects of various factors such as specimen size, crack length, loading mode and so on reveals the followings;<BR>1) Brittle-ductile transition temperature Ts of the tensile specimen with a notch is little influenced by crack length, specimen size, residual stress and local embrittlement in the vicinity of the notch tip.<BR>2) Fracture overall strain of the tensile specimen with a notch beyond general yielding can be estimated as follows :<BR>eF=δc/2πc<BR>Where δc is the critical COD and c is a half crack length.<BR>3) Low strained brittle fracture initiation temperature TL at which the fracture overall strain of the tensile specimen with a notch is equal to yielding strain of material used is the temperature that the critical COD satisfies the following equation :<BR>δc=2πcσY/E<BR>4) The testing method measured elongation in small notched tensile specimen is proposed as an evaluation method of materials based on strain criterion.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ