Optimization of Fuel Rod Enrichment Distribution to Minimize Rod Power Peaking throughout Life within BWR Fuel Assembly.

書誌事項

タイトル別名
  • Optimization of Fuel Rod Enrichment Dis

この論文をさがす

抄録

<BR>A practical method was developed for determining the optimum fuel enrichment distribution within a boiling water reactor fuel assembly. The method deals with two different optimization problems, i.e. a combinatorial optimization problem grouping fuel rods into a given number of rod groups with the same enrichment, and a problem determining an optimal enrichment for each fuel rod under the resultant rod-grouping pattern. In solving these problems, the primary goal is to minimize a predefined objective function over a given exposure period. The objective function used here is defined by a linear combination: C1X+C2XG, where X and XG stand for a control variable to give the constraint respectively for a local power peaking factor and a gadolinium rod power, and C1 and C2 are a user-definable weighting factor to accommodate the design preference. <BR>The algorithm of solving the combinatorial optimization problem starts with finding the optimal enrichment vector without any rod-grouping, and promising candidates of rod-grouping patterns are found by exhaustive enumeration based on the resulting fuel enrichment ordering, and then the latter problem is solved by using the method of approximation programming. The practical application of the present method is shown for a contemporary 8×8 Pu mixed-oxide fuel assembly with 10 gadolinium-poisoned rods.

収録刊行物

参考文献 (5)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ