Benchmark Analysis of Criticality Experiments in the TRIGA Mark 2 Using a Continuous Energy Monte Carlo Code MCNP

書誌事項

タイトル別名
  • Benchmark Analysis of Criticality Experiments in the TRIGA Mark II Using a Continuous Energy Monte Carlo Code MCNP.
  • Benchmark Analysis of Criticality Exper

この論文をさがす

抄録

The criticality analysis of the TRIGA-II benchmark experiment at the Musashi Institute of Technology Research Reactor (MuITR, 100kW) was performed by the three-dimensional continuous-energy Monte Carlo code (MCNP4A). To minimize errors due to an inexact geometry model, all fresh fuels and control rods as well as vicinity of the core were precisely modeled. Effective multiplication factors (keff) in the initial core critical experiment and in the excess reactivity adjustment for the several fuel-loading patterns as well as the fuel element reactivity worth distributions were used in the validation process of the physical model and neutron cross section data from the ENDF/B-V evaluation. The calculated keff overestimated the experimental data by about 1.0%Δk/k for both the initial core and the several fuel-loading arrangements (fuels or graphite elements were added only to the outer-ring), but the discrepancy increased to 1.8%Δk/k for the some fuel-loading patterns (graphite elements were inserted into the inner-ring). The comparison result of the fuel element worth distribution showed above tendency. All in all, the agreement between the MCNP predictions and the experimentally determined values is good, which indicates that the Monte Carlo model is enough to simulate criticality of the TRIGA-II reactor.

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (10)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ