翼型のクラウドキャビテーションの発生機構とその制御

書誌事項

タイトル別名
  • Mechanism of Cloud Cavitation and Its Control
  • ヨクガタ ノ クラウド キャビテーション ノ ハッセイ キコウ ト ソノ セイ

この論文をさがす

説明

This paper describes the experimental result of cloud cavitation on a two-dimensional foil. Cloud cavitation was observed by a high speed camera and a high speed video camera to know the mechanism of cloud cavitation. Ink was injected to investigate the reserve flow (re-entrant jet) at the bottom of the sheet cavity. The flow around the sheet cavity was measured by a laser doppler velocimeter. By applying conditional sampling technique on the flow measurement, unsteady flow field was examined with the motion of cloud cavitation.<BR>A small square bar was attached on the foil surface and the effect on the cloud cavitation was investigated.<BR>The conclusion are as follows : <BR>(1) The shedding of cloud cavitation is caused by re-entrant jet. <BR>(2) The re-entrant jet starts at the rear center of a sheet cavity and spreads to the leading edge.The re-entrant jet disturbs the sheet cavity and the sheet cavity collapses into a mass of bubbly cavities. When the re-entrant jet reaches the cavity leading edge, the shedding of cloud cavity occurs.<BR>(3) A bar attached on the foil surface reduces the re-entrant flow, resulting in the reduction of cloud cavitation shedding. A ditch on the foil surface gives the similar effect on the cloud cavitation.

収録刊行物

被引用文献 (6)*注記

もっと見る

参考文献 (5)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ