フッ化物水溶液中においてSUS304ステンレス鋼に生成した不動態皮膜の耐硫酸腐食性

書誌事項

タイトル別名
  • Against Sulfuric Acid Attack of Passive Film Formed on SUS 304 Stainless Steel in Fluoride Solutions.
  • フッカブツ スイヨウエキ チュウ ニ オイテ SUS304 ステンレス コウ ニ セイセイ シタ フドウタイ ヒマク ノ タイリュウサン フショクセイ

この論文をさがす

抄録

Electrochemical conditions for improving the resistance to active corrosion of SUS 304 stainless steel using potentiostatic pretreatment in a total fluoride concentration of 0.5kmol·m-3 solution with various pH at 303K were studied. Active corrosion susceptibility after treatment was evaluated by measuring the self-activation time, τa, in deaerated 1.0kmol·m-3 sulfuric acid solution at 303K.<br>In an acidic fluoride solution, maximum stability is obtained at -0.4V (SCE) of pretreatment potential in a solution pH of 1.8. XPS analysis of treated steels showed that Cr content extensively increased in the oxide layer of passive film, improving resistance to active corrosion, and F- ions located in the hydroxide layer, assuming that passive film consists of three layers, hydrocarbon contaminant covering a hydroxide layer of Cr and an underlying Cr and Fe oxide layer.<br>In a neutral solution, maximum stability is obtained at 0.6V (SCE) of pretreatment potential in a solution pH of 8.6. Cr enrichment was not seen in the passive film by XPS. Anodic polarization measurements suggest that structural changes in the passive film take place at 0.6V (SCE).<br>In an alkaline solution, however, treated steel can not acquire a high resistance to active corrosion over a wide range of potentials for pretreatment. XPS showed that the hydroxide layer of passive film was very thin compared to that formed in an acidic solution and F- ions were entirely absent in the passive film.

収録刊行物

  • 表面技術

    表面技術 50 (5), 453-459, 1999

    一般社団法人 表面技術協会

参考文献 (16)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ