The Manufacture of Fine Grit Electrodeposited Diamond Wheels and their Grinding Performance.
-
- SUZUKI Kazuo
- TOMEI Diamond Co.
-
- SATO Kinji
- Sci. and Tech., Science Univ. of Tokyo
-
- YOKOYAMA Toshio
- Sci. and Tech., Science Univ. of Tokyo
Bibliographic Information
- Other Title
-
- 微粒電着ダイヤモンド砥石の作製および研削性能
- ビリュウ デンチャク ダイヤモンド トイシ ノ サクセイ オヨビ ケンサク セ
Search this article
Abstract
Electrodeposited diamond wheels for finish grinding require fine-grain diamonds. Promoting a reexamination of electrodeposition conditions. Initially, a previously proposed method involving distribution of diamond grit onto the wheel surface in an electrodeposition fluid was considered. This method uses two concentric cylinders and a J-type nozzle, both made of glass, with the inner cylinder containing a suspension of diamond grit in the electrodeposition fluid, and the outer cylinder containing electrodeposition liquid only. Improvements were made in the shape and dimensions on the inner cylinder, and the angle of tilt of the nozzle was changed from 60° to 70°. Electrodeposited diamond wheels were manufactured using the improved method, and grinding performance was then examined from the point of view of wheel wear and finished surface roughness. It is concluded that a current density 1A/m2yields finish grinding wheel having good performance.
Journal
-
- Journal of The Surface Finishing Society of Japan
-
Journal of The Surface Finishing Society of Japan 44 (7), 615-620, 1993
The Surface Finishing Society of Japan
- Tweet
Details 詳細情報について
-
- CRID
- 1390282679092748160
-
- NII Article ID
- 130001072232
-
- NII Book ID
- AN1005202X
-
- ISSN
- 18843409
- 09151869
-
- NDL BIB ID
- 3836467
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed