二液法活性化により非導電性基板上に形成される吸着物と無電解Ni‐Pめっき初期析出物の微視的形態

  • 山岸 憲史
    姫路工業大学 大学院工学研究科 兵庫県立工業技術センター
  • 岡本 尚樹
    姫路工業大学 大学院工学研究科 東京都立大学大学院 工学研究科
  • 鵜川 博之
    姫路工業大学 大学院工学研究科
  • 福室 直樹
    姫路工業大学 大学院工学研究科 (2004年4月1日より)兵庫県立大学 大学院工学研究科
  • 八重 真治
    姫路工業大学 大学院工学研究科 (2004年4月1日より)兵庫県立大学 大学院工学研究科
  • 松田 均
    姫路工業大学 大学院工学研究科 (2004年4月1日より)兵庫県立大学 大学院工学研究科

書誌事項

タイトル別名
  • Microscopical Morphology of Adsorbate Produced during Two-step Catalyzation Pretreatment and Deposit Formed at Initial Stage of Electroless Ni-P Deposition on Non-conductive Substrates
  • 二液法活性化により非導電性基板上に形成される吸着物と無電解Ni-Pめっき初期析出物の微視的形態
  • 2エキホウ カッセイカ ニ ヨリ ヒドウデンセイ キバン ジョウ ニ ケイセイ サレル キュウチャクブツ ト ムデンカイ Ni Pメッキ ショキ セキシュツブツ ノ ビシテキ ケイタイ

この論文をさがす

抄録

The electroless plating method has a particular advantage in that it accepts non-conductive substrates as its substrate materials. The catalyzation pretreatment process is essential for initiating electroless deposition. The most common two-step pretreatment process prior to electroless nickel plating was studied here, which includes the sensitizing step and the activating step. The objective of this study is to investigate the morphological changes of the adsorbate produced on the non-conductive substrates during the period before and after the deposition is initiated. The results obtained are as follows :<br> By using an ICP for the nickel precipitate weight gain measurement when the glass substrate which conducted the catalyzation process was immersed in an electroless Ni-P plating bath, the results show that deposition is already initiated with a low deposition rate even before the deposition can be confirmed with a visual inspection.<br> The observations of the catalyzed surfaces using SEM detect the aggregates of adparticles with sizes grown to reach several microns. The incidence of the grown aggregates has a tendency to be higher as the solubility of Sn in the activating solution is increases. Comparing the results of the morphological observation before and after the initiation of the deposition, it should be concluded that the aggregates produced during the activation step play the starting point of the massive nodular grains that exist on the surface of deposits.<br>

収録刊行物

  • 表面技術

    表面技術 55 (6), 417-422, 2004

    一般社団法人 表面技術協会

参考文献 (52)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ