ポリエステルスーツ地のプリーツセット性とプリーツセットによる風合変化

DOI

書誌事項

タイトル別名
  • Pleat Retention and the Change of Fabric Hand of Polyester Woven Fabrics for Men's Suits

抄録

The permanent pleat retention of the polyester fabrics can be achieved by the thermal finishing using a pressing machine. No optimal finishing conditions have been revealed to achieve the pleat retention without deteriorating the fabric hand. This article investigates the degree of the pleat retention, dimensional change of pleat set fabrics and the change of fabric hand by varying the temperature of a dry and steam pressing. The main results are summarized as follows:<BR>(1) A fabric surface tester, KES-FB4, has been used to evaluate the degree of pleat retention.<BR>(2) An effective pleat setting can be achieved at the temperature of 150-160°C in the dry pressing. However, in the steam pressing, an effective setting can be achieved even at the lower temperature of 105-130°C.<BR>(3) The method of pressing and the temperature of pressing little affect the dimensional change of pressed fabrics.<BR>(4) The pressing tends to deteriorate the fabric hand. A dry pressing more deteriorates the fabric hand than a steam pressing does.

収録刊行物

  • 繊維製品消費科学

    繊維製品消費科学 21 (6), 250-256, 1980

    一般社団法人 日本繊維製品消費科学会

詳細情報 詳細情報について

  • CRID
    1390282679184589440
  • NII論文ID
    130004008586
  • DOI
    10.11419/senshoshi1960.21.250
  • ISSN
    18846599
    00372072
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ