リン酸賦活による竹由来のメソ孔活性炭の調製

書誌事項

タイトル別名
  • Preparation of bamboo-based mesoporous activated carbon by phosphoric acid activation
  • リンサン フカツ ニ ヨル タケ ユライ ノ メソコウ カッセイタン ノ チョウセイ

この論文をさがす

抄録

Mesoporous activated carbons (ACs) were prepared from bamboo by phosphoric acid activation, and the optimum activation conditions such as impregnation ratio (H3PO4/bamboo ratio) and activation temperature were examined. The pore structure of the ACs was determined by N2 adsorption-desorption isotherms. The results showed that the AC prepared using an impregnation ratio of 3 g/g and an activation temperature of 500 °C had the highest mesopore volume of 0.93 cm3/g. For further development of pores in AC, alkali pretreatment of the bamboo by soaking in aqueous sodium hydroxide was conducted and the pretreated bamboo was then activated with phosphoric acid under the optimum conditions. The influences of alkali pretreatment on the components of the raw material and the pore structure of the AC were examined, and the properties of bamboo before and after alkali pretreatment were also evaluated by thermogravimetric analysis and scanning electron microscopy. As a result, the possibility of the elution of hemicellulose and lignin from bamboo by alkali pretreatment was suggested. The AC prepared from alkali-pretreated bamboo had a mesopore volume of as high as 1.50 cm3/g, suggesting that the elution of hemicellulose and lignin from the raw material contributes to the development of mesopores by phosphoric acid activation.

収録刊行物

  • 炭素

    炭素 2014 (261), 2-7, 2014

    炭素材料学会

被引用文献 (3)*注記

もっと見る

参考文献 (27)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ