Effects of Forming Conditions on Wrinkling in Necking of Tube End
-
- Takahashi Yoichi
- Department of Mechanical Engineering, Kagawa National College of Technology
-
- Kihara Shigefumi
- Department of Mechanical Engineering, Kagawa National College of Technology
-
- Nagamachi Takuo
- Institute of Technology and Science, The University of Tokushima
-
- Mizumoto Hiroaki
- Nihon Spindle MFG. Co., Ltd.
-
- Nakata Yuya
- Advanced Course, Kagawa National College of Technology
この論文をさがす
抄録
The effects of forming conditions on wrinkling in the neck of stainless-steel tubes were investigated using experiments and three-dimensional finite element simulations. The materials used for this study were tubes designed for automotive exhaust parts. When the axial or radial forming pitch of the rollers is large, the outside of the tube is subjected to considerable compressive stress in the circumferential direction by contact with the rollers. Simultaneously, the inside of the tube is subjected to considerable tensile stress in the circumferential direction. Consequently, the tube is subjected to excessive localized forming, which causes the curvature to become uneven in the circumferential direction, thereby resulting in wrinkling. The number of contact points with the rollers was determined. Results show that the optimum forming conditions were easily determined to achieve short forming times and high dimensional accuracy.
収録刊行物
-
- MATERIALS TRANSACTIONS
-
MATERIALS TRANSACTIONS 52 (1), 31-36, 2011
公益社団法人 日本金属学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679225900160
-
- NII論文ID
- 10027672142
-
- NII書誌ID
- AA1151294X
-
- ISSN
- 13475320
- 13459678
-
- NDL書誌ID
- 10926850
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可