Dynamic Strain Induced Transformation of Austenite to Ferrite during High Temperature Extrusion of Low Carbon Steel
-
- Shaban M.
- Department of Materials Science Engineering, Sahand University of Technology
-
- Gozalzadeh S.
- Department of Materials Science Engineering, Sahand University of Technology
-
- Eghbali B.
- Department of Materials Science Engineering, Sahand University of Technology
この論文をさがす
抄録
Ultra fine grained materials exhibit superior mechanical properties compared with the conventional coarse grained one. In the present work, the hot extrusion process was conducted on plain low carbon steel to achieve ultra fine ferritic structure. At first, with the aid of 3D finite element simulation an appropriate preheating temperature for the initiation of dynamic strain induced transformation of austenite to ferrite was predicted to be 930°C. After hot extrusion, the results of microstructural analysis by optical microscopy showed that the predicted temperature was suitable. Extruded samples showed ultra fine ferrite structure with average grain size of 1 μm on a plane perpendicular to material flow. Also, the microstructural developments with strain in the extrusion zone confirmed the occurrence of dynamic strain induced transformation of austenite to ferrite during deformation process. Tensile strength of processed steel is two times higher than coarse grained one.
収録刊行物
-
- MATERIALS TRANSACTIONS
-
MATERIALS TRANSACTIONS 52 (1), 8-11, 2011
公益社団法人 日本金属学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679225926784
-
- NII論文ID
- 10027672071
-
- NII書誌ID
- AA1151294X
-
- ISSN
- 13475320
- 13459678
-
- NDL書誌ID
- 10926787
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可