Tensile Properties of Forged Mg-Al-Zn-Ca Alloy

DOI Web Site Web Site 被引用文献8件 参考文献42件 オープンアクセス
  • Hakamada Masataka
    Materials Research Institute for Sustainable Development, National Institute of Advanced Industrial Science and Technology
  • Watazu Akira
    Materials Research Institute for Sustainable Development, National Institute of Advanced Industrial Science and Technology
  • Saito Naobumi
    Materials Research Institute for Sustainable Development, National Institute of Advanced Industrial Science and Technology
  • Iwasaki Hajime
    The Materials Process Technology Center

書誌事項

公開日
2008
DOI
  • 10.2320/matertrans.mra2007261
公開者
公益社団法人 日本金属学会

この論文をさがす

説明

Continuously-casted Mg-9Al-1Zn-1Ca (in mass%) alloy (Mg-Ca alloy) and Mg-9Al-1Zn alloys (Ca-free Mg alloy) were forged at 573 K and their mechanical properties were investigated by tension tests at ambient temperature and 573 K. The forged Mg-Ca alloy showed higher 0.2% proof stress than the forged Ca-free Mg alloy. The high strength for the Mg-Ca alloy was attributed not only to grain refinement by hot forging, but also to the strengthening mechanisms arising from the difference in thermal expansion and geometrical incompatibility between Mg matrix and second phase. The Ca addition decreased the elongation to failure; however, the decrease was reduced for the forged specimens, compared to the unforged specimen. This results from segmentation of the second phases by the hot forging. Also, the forged Mg-Ca alloy showed a large elongation of 284% at 573 K.

収録刊行物

被引用文献 (8)*注記

もっと見る

参考文献 (42)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ