Al₀.₅TiZrPdCuNi High-Entropy (H-E) Alloy Developed through Ti₂₀Zr₂₀Pd₂₀Cu₂₀Ni₂₀ H-E Glassy Alloy Comprising Inter-Transition Metals

  • Takeuchi Akira
    WPI-Advanced Institute for Materials Research, Tohoku University
  • Wang Junqiang
    WPI-Advanced Institute for Materials Research, Tohoku University
  • Chen Na
    WPI-Advanced Institute for Materials Research, Tohoku University
  • Zhang Wei
    Institute for Materials Research, Tohoku University School of Materials Science and Engineering, Dalian University of Technology
  • Yokoyama Yoshihiko
    Institute for Materials Research, Tohoku University
  • Yubuta Kunio
    Institute for Materials Research, Tohoku University
  • Zhu Shengli
    Institute for Materials Research, Tohoku University

書誌事項

タイトル別名
  • Al<sub>0.5</sub>TiZrPdCuNi High-Entropy (H-E) Alloy Developed through Ti<sub>20</sub>Zr<sub>20</sub>Pd<sub>20</sub>Cu<sub>20</sub>Ni<sub>20</sub> H-E Glassy Alloy Comprising Inter-Transition Metals

この論文をさがす

抄録

An Al0.5TiZrPdCuNi high-entropy (H-E) alloy with a bcc single phase was found through a Ti20Zr20Pd20Cu20Ni20 H-E glassy alloy designed based on equi-atomicity inherent to H-E alloys. The constituent elements and the composition of the Ti20Zr20Pd20Cu20Ni20 alloy were determined by regarding a binary Cu64Zr36 bulk metallic glass as Cu60Zr40 alloy and subsequent replacements of the Cu and Zr atoms with other late- and early-transition metals, respectively. The Ti20Zr20Pd20Cu20Ni20 alloy in a ribbon shape forms into a glassy single phase. The addition of 0.5Al to the Ti20Zr20Pd20Cu20Ni20 H-E glassy alloy resulted in forming a bcc single phase for a rod specimen with a diameter of 1.5 mm. The analysis revealed that the Al0.5TiZrPdCuNi H-E alloy is characterized by mixing enthalpy of −46.7 kJ·mol−1 and Delta parameter of 8.8, which are considerably larger and negative for the former and larger for the latter against the conventional H-E alloys.

収録刊行物

被引用文献 (6)*注記

もっと見る

参考文献 (40)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ