Microfluidic Polymer Chip Integrated with an ISFET Detector for Cationic Surfactant Assay in Dental Rinses

DOI PDF Web Site Web Site Web Site ほか1件をすべて表示 一部だけ表示 被引用文献6件 参考文献103件
  • MASADOME Takashi
    Department of Applied Chemistry, Faculty of Engineering, Shibaura Institute of Technology
  • YADA Kensuke
    Department of Applied Chemistry, Faculty of Engineering, Shibaura Institute of Technology
  • WAKIDA Shin-ichi
    Human Stress Signal Research Center (HSS), National Institute of Advanced Industrial Science and Technology (AIST)

この論文をさがす

抄録

A cationic surfactant ion-selective field-effect transistor (cationic surfactant-ISFET) has been developed based on the tetraphenylborate derivative known as sodium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate. The cationic surfactant-ISFET shows an almost Nernstian response to tetradecyldimethylbenzylammonium chloride (Zephiramine) over a concentration range between 1.0 × 10-6 M and 1.0 × 10-3 M, with a slope of 58.5 ± 1.7 mV/decade. The cationic surfactant-ISFET can be used over a range of pH values, between pH 3 and 9. The cationic surfactant-ISFET shows excellent selectivity for Zephiramine over small inorganic cations, but shows similar selectivity for other cationic surfactants, such as hexadecyltrimethylammonium and stearyltrimethylammonium ions. A microfluidic polymer chip was integrated with the cationic surfactant-ISFET, and this was fabricated using polystyrene plates and stainless wires as a template for the channel. Cationic surfactant-ISFETs used in a batch system and microchips integrated with cationic surfactant-ISFETs showed very similar performance in terms of low detection limits, slope sensitivity and the stability of the potential response. The microfluidic polymer chip was then applied to the determination of cationic surfactants in dental rinses.

収録刊行物

  • Analytical Sciences

    Analytical Sciences 22 (8), 1065-1069, 2006

    社団法人 日本分析化学会

被引用文献 (6)*注記

もっと見る

参考文献 (103)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ