編地分析および設計支援システムの開発 (第1報)  画像分析による平編ニットの密度計測

書誌事項

タイトル別名
  • Analyzing and Design Supporting System for Knit Fabrics. Part 1: Density Measurement of Plane Knit Fabrics Using Image Processing.
  • アミジ ブンセキ オヨビ セッケイ シエン システム ノ カイハツ ダイ1ポウ
  • Part 1 : Density Measurement of Plane Knit Fabrics Using Image Processing
  • (第1報) 画像分析による平編ニットの密度計測

この論文をさがす

抄録

A measurement system was developed to measure the density of knit fabrics automatically without destruc tion, and the applicability was discussed. The density of knit fabrics is concerned greatly with the appearance of the finish, so the measurement is very important for the design and reproduction. Computer image processing and information analysis were implemented in the system to measure the density. The surface images of knit fabrics were scanned by an image scanner and saved to disk on a computer. The threshold processing and histogram processing were performed to determine the positions of courses and wales. Then, the system counted the number of stitches in a course. The density, the number of courses and wales per the unit length, were measured for some plane stitch knit fabrics. The density measurement was successful for relatively coarse fabrics such as five gauges and was good for gauge of less than or equal to 12, but was sometimes incorrect for fine fabrics such as 20 gauge. This is caused by the resolution of the image scanner. If the resolution of the image increase, the measurements become successful. This system can be used instead of the current manual measurement using a textile analysis glass.

収録刊行物

  • 繊維機械学会誌

    繊維機械学会誌 51 (10), T205-T211, 1998

    一般社団法人 日本繊維機械学会

被引用文献 (2)*注記

もっと見る

参考文献 (17)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ