カード機のフラットに関する研究

DOI Web Site

書誌事項

タイトル別名
  • The Flats of a Carding Machine
  • カードキ ノ フラット ニカンスルケンキュウ 3 ショクシンハバ オ オオキク
  • Part 3 : Flats with Wider wire-sets
  • (第3報) 植針幅を大きくしたフラット

この論文をさがす

抄録

Flats were made, which have wire fillet card clothings with wire-sets of 31mm adhered to flat bars of 33.3mm in width.With these flats, the relation between the sliver quality and the inclination of flats and the relation between the sliver qualit yand the flat acting angle were examined respectively.Besides, these newly made flats and ordinary flats with wire-sets of 22mm were compared.<BR>1) These newly made flats with the inclination of 1/37.5 are almost the same as ordinary flats in the amount of neps in the sliver.In newly made flats, the amount of neps decrease as the inclination of flats is made smaller than 1/37.5.This tendency is more remarkable in thecase of 90°of the flath acting angle than in the case of 75°.<BR>2) In these newly made flats, the amout of neps in the sliver is smaller in case of 90°than in case of 75°.<BR>3) In these newly made flats, the mean length of the fiber in the sliver remains same, regardless of the inclination of flats and the flat acting angle.

収録刊行物

  • 繊維機械学会誌

    繊維機械学会誌 29 (3), T41-T49, 1976

    一般社団法人 日本繊維機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ