書誌事項
- タイトル別名
-
- Metering Device for Variable Rate Granular Fertilizer Applicator-Metering Device Power Requirement and Torque-
- Metering Device Power Requirement and Torque
この論文をさがす
説明
The objective of this research was to reduce the power requirement and torque of a metering device for a variable rate granular fertilizer applicator under development. To that end, two prototypes for the metering device roller feeder were made and tested: a flexible rubber type and an edge-cell type. On the basis of metering two types of chemical fertilizer, the power requirement and torque of both types of metering devices were measured and compared. Results showed that both metering devices could precisely meter the applied amount of fertilizer by controlling roller rotational speed. The edge-cell roller feeder offers the advantage because it can control to meter the amount of fertilizer with a lower power requirement than that of the rubber roller feeder.
収録刊行物
-
- 農業機械学会誌
-
農業機械学会誌 66 (2), 123-129, 2004
農業食料工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679288762496
-
- NII論文ID
- 10012719297
-
- NII書誌ID
- AN00200470
-
- ISSN
- 18846025
- 02852543
-
- NDL書誌ID
- 6876962
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDLサーチ
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可