高速代かきロータリの開発(第2報)―つめ仕様の検討と開発機の概要―

  • 後藤 隆志
    農業機械学会 生物系特定産業技術研究推進機構生産システム研究部 現在: 農業・生物系特定産業技術研究機構生物系特定産業技術研究支援センター基礎技術研究部
  • 堀尾 光広
    農業機械学会 生物系特定産業技術研究推進機構生産システム研究部 現在: 農業・生物系特定産業技術研究機構生物系特定産業技術研究支援センター生産システム研究部
  • 市川 友彦
    農業機械学会 生物系特定産業技術研究推進機構生産システム研究部
  • 長屋 克成
    小橋工業 (株) 開発グループ
  • 久慈 良治
    (株) ササキコーポレーション技術開発部

書誌事項

タイトル別名
  • Development of High-Speed Rotary Harrow for Puddling (Part 2)-Studies on Blade Specifications and Outline of the Developed Rotary Harrow-
  • コウソク シロカキ ロータリ ノ カイハツ ダイ2ホウ ツメ シヨウ ノ ケントウ ト カイハツキ ノ ガイヨウ
  • Studies on Blade Specifications and Outline of the Developed Rotary Harrow
  • つめ仕様の検討と開発機の概要

この論文をさがす

抄録

We conducted fundamental tests on the blade of puddling harrows and found the following results. (1) The blade arrangement in which a pair of blades was installed 15mm apart laterally yielded higher performance on soil-pulverizing and residue-burying than the conventional blade arrangement. (2) The PTO specific power of the harrow with rotary blades having a cutting angle of 95° was 5 to 10% lower than that of the harrow with 105° cutting angle blades. However the residue-burying performance of the 95° cutting angle blade was worse than that of the 105° cutting angle blade. (3) Increasing the blade rotating speed 8% degraded the residue-burying performance and increased the PTO specific power by 14%. Based on the results of fundamental tests, we manufactured prototype harrows. These harrows had the following features. (1) A new large rake was installed in front of the rear cover. (2) The arrangement of the blades was changed. (3) The inner volume of the rear cover was larger than that of conventional harrows.

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (4)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ