書誌事項
- タイトル別名
-
- Removal of Single Particles Adhered on a Flat Surface by Vibrating Air Jet
- コウシュウハ シンドウ キリュウ ニヨル ヒョウメン フチャク リュウシ ノ
この論文をさがす
抄録
Removal of deposited single particles by use of a vibrating air jet has been studied experimentally, with particular attention to the effect of operating conditions. Two types of nozzle were newly designed and 6 sorts of metal plates were used as a vibrating plate. Twelve combinations of the nozzle and the vibrating plate have been tested to get the best combination for the generation of a high frequency vibration. Experimental results showed that the removal efficiency is almost determined by the vibration characteristics rather than air jet velocity. When the nozzle pressure is set at 2.5×105 Pa or 3.0×105 Pa, the removal efficiency tends to increase with the frequency of the vibration at the surface. In this case, longer jet duration time enhances the efficiency. Then, the number of repetition of pressure pulsation is one of the main cause of the effects of vibration. On the other hand, when the pressure is set at 3.5×105 Pa, the removal efficiency is affected by the shape of the vibrating wave.
収録刊行物
-
- エアロゾル研究
-
エアロゾル研究 13 (2), 133-141, 1998
日本エアロゾル学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679319393152
-
- NII論文ID
- 10002783015
-
- NII書誌ID
- AN10041511
-
- ISSN
- 1881543X
- 09122834
-
- NDL書誌ID
- 4512513
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可
