加圧成型セラミックスの表面処理がグラスアイオノマー系合着材料の接着強さにおよぼす影響

  • 川本 善和
    日本大学歯学部補綴学教室クラウン・ブリッジ学講座 日本大学歯学部総合歯学研究所高度先端医療研究部門
  • 長井 太郎
    日本大学歯学部補綴学教室クラウン・ブリッジ学講座
  • 山崎 正登
    日本大学歯学部補綴学教室クラウン・ブリッジ学講座
  • 根本 美佳
    日本大学歯学部補綴学教室クラウン・ブリッジ学講座
  • 桟 淑行
    日本大学歯学部補綴学教室クラウン・ブリッジ学講座 日本大学歯学部総合歯学研究所高度先端医療研究部門
  • 中村 光夫
    日本大学歯学部補綴学教室クラウン・ブリッジ学講座
  • 松村 英雄
    日本大学歯学部補綴学教室クラウン・ブリッジ学講座 日本大学歯学部総合歯学研究所高度先端医療研究部門

書誌事項

タイトル別名
  • Effect of surface preparations on bond strength to heat-pressed ceramics of glass-ionomer luting agents

この論文をさがす

抄録

The purpose of the current study was to investigate the effect of surface preparations on bond strength to heat-pressed ceramic material (IPS Empress 2, E2) of glass-ionomer luting materials. The E2 specimens were employed as the adherend materials and E2 surface treatments for mechanical retention were; 1) etching with phosphoric acid, 2) etching with hydrofluoric acid (HF) and 3) air-abrasion with alumina. Surface treatments for chemical retention were silane treatments. Two conventional glass-ionomer materials and two resinmodified glass-ionomer materials were used as the luting agents. Shear bond strengths were determined after 24 hours.<BR>The HF etching enhanced bond strength of all luting materials. Surface preparations for mechanical retention were effective for conventional glass-ionomer materials, nevertheless silane treatments gave negative effects. Application of the silane primer was effective for resin-modified glass-ionomer materials. Especially, conbined use of the surface preparation of HF and silane treatment was the most effective in enhancing bond strength of resinmodified glass-ionomer materials.

収録刊行物

  • 接着歯学

    接着歯学 22 (3), 186-194, 2004

    日本接着歯学会

参考文献 (17)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ