マグネットアタッチメントにおけるキーパーを支台歯へ直接固定する方法の研究―第1報  ポストキーパーと築造用コンポジットレジンの接着強さ―

  • 大橋 博文
    鹿児島大学大学院医歯学総合研究科先進治療科学専攻顎顔面機能再建学講座咬合機能補綴学分野
  • 河野 博史
    鹿児島大学大学院医歯学総合研究科先進治療科学専攻顎顔面機能再建学講座咬合機能補綴学分野
  • 吉岡 崇
    鹿児島大学大学院医歯学総合研究科先進治療科学専攻顎顔面機能再建学講座咬合機能補綴学分野
  • 迫口 賢二
    鹿児島大学大学院医歯学総合研究科先進治療科学専攻顎顔面機能再建学講座咬合機能補綴学分野
  • 嶺崎 良人
    鹿児島大学大学院医歯学総合研究科先進治療科学専攻顎顔面機能再建学講座咬合機能補綴学分野
  • 鬼塚 雅
    鹿児島大学大学院医歯学総合研究科先進治療科学専攻顎顔面機能再建学講座咬合機能補綴学分野
  • 田中 卓男
    鹿児島大学大学院医歯学総合研究科先進治療科学専攻顎顔面機能再建学講座咬合機能補綴学分野

書誌事項

タイトル別名
  • Study on direct fixation method of magnetic attachment to abutment teeth-Bond strength of post keeper to build-up composite-
  • Bond strength of post keeper to build-up composite
  • 第1報ポストキーパーと築造用コンポジットレジンの接着強さ

この論文をさがす

抄録

A new magnetic attachment system was designed that a keeper was fixed directly into a resin root-coping. This study evaluated the bonding of keeper to a buildup composite for root-coping. The experimental post-keeper was made with Fe-Cr magnetic alloy and consist of a disc-keeper (H: 0.8 mm, and ∅: 3.0, 3.5, 4.0, or 4.5 mm) and a tapered-post (L: 1.5 mm, ∅: 1.5 mm). The keeper without post was used as control. The bonding surface of keeper was pretreated with one of three methods (50 μm alumina sandblasting [S], S plus application of metal-primer [S+P], or no treatment). After the keeper was placed in a buildup composite (Clearfil® Photocore) poured into acrylic tube, the composite was photo-polymerized to complete test specimen. The specimens were also fabricated that the post-keeper was bonded to a polymerized composite with the adhesive resin (Panavia® Fluoro Cement or Super-Bond C & B). Five specimens for each experimental group were subjected to 20, 000 thermocycles before tensile bond strengths were measured. The data were analyzed with ANOVA and Fisher's test (p=0.05). From the results, it was founded that the fixation which the post-keeper over the 3.5 mm diameter pretreated with S+P was bonded using Super-Bond C & B could be most effective to increase the bond durability of keeper.

収録刊行物

  • 接着歯学

    接着歯学 22 (3), 237-244, 2004

    日本接着歯学会

被引用文献 (1)*注記

もっと見る

参考文献 (15)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ