ハイブリッドセラミックスの接着強さに及ぼす表面処理の影響

DOI
  • 新里 朗
    日本歯科大学歯学部歯科補綴学教室第2講座
  • 高橋 英登
    日本歯科大学歯学部歯科補綴学教室第2講座
  • 横塚 繁雄
    日本歯科大学歯学部歯科補綴学教室第2講座

書誌事項

タイトル別名
  • Effect of Surface Treatment on Bond Strength of Hybrid Ceramics.

抄録

For appropriate functioning of hybrid ceramics in the oral cavity, not only the mechanical strength of the restoration material itself but also its fitness and bonding to the abutment tooth, i.e., unification with the tooth, is indispensable. One of the factors associated with bonding is surface treatment of the bonding surface of the restoration material.<BR>To clarify the effects of surface treatment on the bond strength of hybrid ceramics, we performed the combination of sandblast treatment, silane treatment, and heat treatment of the bonding surface before bonding with resin cement. After storage of the samples at 37°C for 24 hours followed by 3, 000 thermal cycles (4-5°C), bond strength was measured.<BR>Bond strength improved after sandblast treatment performed in combination with silane treatment and heat treatment of the bonding surface. Even after thermal cycles, bond strength only slightly decreased. Therefore, the combination of sandblast treatment, silane treatment, and heat treatment of the bonding surface of hybrid ceramics is useful for improving bond strength and bonding durability .

収録刊行物

  • 接着歯学

    接着歯学 18 (1), 1-13, 2000

    日本接着歯学会

詳細情報 詳細情報について

  • CRID
    1390282679326779776
  • NII論文ID
    130004047896
  • DOI
    10.11297/adhesdent1983.18.1
  • ISSN
    21859566
    09131655
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ