ポリイミド樹脂中銅，鉄，カリウム，ナトリウムの原子吸光分析法による定量

DOI NDLデジタルコレクション Web Site Web Site 被引用文献1件

書誌事項

タイトル別名
  • Determination of copper, iron, potassium and sodium in polyimide resins by atomic absorption spectrometry
  • ポリイミド ジュシチュウ ドウ テツ カリウム ナトリウム ノ ゲンシ キュウ

この論文をさがす

抄録

Polyimide resins (polyimide-isoindoloquinazolincdione) were decomposed by a dry ashing technique and analyzed for the four elements by flame (air-acetylene) atomic absorption spectrometry. A specially designed quartz ashing vessel was used to control the temperature and atmospheric composition for the ashing. Recoveries of four elements decreased with increasing ashing temperature, being dependent on crucible materials. The recoveries of copper and sodium were not satisfactory when the platinum and quartz crucible were used, respectively. These losses were attributed to the retention of respective metal on the crucible used, which was demonstrated by radioisotopic tracer method. The increase of oxygen content in atmospheric gases resulted in a slight increase of temperature and shortened the ashing time. In practice volatile organic solvent in the resin was first removed by increasing the heating temperature from 100 to 500°C and then the oxidant gases consisting of oxygen and air in equivalent volume was supplied to the ashing vessel at a flow rate of 1.2 l/min. The temperature was raised to 600°C to complete the ashing for one hour. The ash was dissolved in 1 ml of nitric acid and stored in 2 N nitric acid, followed by atomic absorption measurements. The standard deviation of (3.37.9) % came out.

収録刊行物

  • 分析化学

    分析化学 28 (3), 201-205, 1979

    公益社団法人 日本分析化学会

被引用文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ