Mechanical Characteristics of Improved Jigs to Prevent Squid Falling Off in the Capturing Process
-
- Guo Haibo
- Department of Marine Science and Technology, Tokyo University of Fisheries
-
- Yada Sadami
- Department of Marine Science and Technology, Tokyo University of Fisheries
-
- Toda Masayoshi
- Department of Marine Science and Technology, Tokyo University of Fisheries
-
- Inada Hiroshi
- Department of Marine Science and Technology, Tokyo University of Fisheries
書誌事項
- タイトル別名
-
- Mechanical Characteristics of Improved
この論文をさがす
抄録
To allure squids and prevent them from falling off from jigs, two new kinds of jigs were devised, the impeller-jig and the roller-jig. In the former, the velocity of water flow before the impeller installed in the lure case of the jig was proportional to the diameter of the opening holes on the lure case under a constant winding velocity of 0.6m/s and 1.0m/s. For the latter, the revolution of the roller set at the top of the jig was also proportional to winding velocity, and the roller turned faster at the groove helix angle of 30° than that of 20° and 45°. The results showed that the new jigs were useful and effective to allure the target squid and hold them firmly with the visual stimulation of the rotating parts.
収録刊行物
-
- Fisheries science
-
Fisheries science 63 (1), 9-14, 1997
公益社団法人 日本水産学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679406387712
-
- NII論文ID
- 130003902974
- 10004868459
-
- NII書誌ID
- AA10993718
-
- NDL書誌ID
- 4153978
-
- ISSN
- 09199268
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可