有限要素解析による管フランジ締結体のボルト締付け過程の評価　　うず巻形ガスケットを用いた場合

DOI Web Site Web Site 被引用文献10件 参考文献10件

書誌事項

タイトル別名
  • Evaluations of Bolt-up Process of Pipe Flange Connection Using Finite Element Analysis. In Case of Using Spiral Wound Gasket.
  • ユウゲン ヨウソ カイセキ ニ ヨル カンフランジ テイケツタイ ノ ボルト シメツケ カテイ ノ ヒョウカ ウズマキケイ ガスケット オ モチイタ バアイ

この論文をさがす

抄録

In multi-bolt system, the scatter in bolt tension is largely dependent on the method of tightening operation and elastic interaction due to the successive tightening of bolts. In this study, focuses are placed on effects of elastic interaction and a new bolt-up strategy using three-dimensional finite element analysis, in which a gasket is modeled as a nonlinear one-dimensional gasket element, is proposed. Two types of numerical procedures are presented here. One is to predict the final scatter in bolt tension when tightening all bolts one by one in arbitray order with target preload. The other is to predict the amounts of initial bolt loads needed to create uniform final preloads with one pass operation of bolt tightening. The effectiveness of the numerical approach proposed here is substantiated by comparing numerical results with experimental ones. Contact pressure distributions on the gasket bearing surface, which significantly affect the sealing performance of flange connections, are also evaluated. The objective connection is composed of bolts, pipe flanges and a spiral wound gasket with inner and outer rings.

収録刊行物

被引用文献 (10)*注記

もっと見る

参考文献 (10)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ