書誌事項
- タイトル別名
-
- Detection of Fatigue Crack Initiation under a Random Load.
- ランダム カジュウカ ニ オケル ヒロウ キレツ ハッセイ ノ ケンチ ニ ツ
この論文をさがす
抄録
A method of detecting fatigue crack initiation in some weak section of a machine element is examined using a holed specimen under random load conditions. Waveforms of two strain functions, that is h1 = εy1 + λεy2 and h2 = εy1 - λεy2, are successively observed. εy1 and εy2 are the strains in the vicinity of the hole and λ is the strain range ratio Δεy1/Δεy2. The function h1 can be used to substitute for the load parameter and the waveform of h2 changes its shape after the crack initiation due to the crack closure behavior. Therefore, we can detect the fatigue crack initiation at the hole by comparison of these two waveforms. Also, these waveforms are analyzed with FFT (Fast Fourier Transformation) to allow for a more effective detection of crack initiation. Power spectrum density of the waveform h2 varies immediately when the crack length measured from hole edge reaches about 0.5 mm. The figures showing the coherence of two waveforms h1 and h2 clearly vary at the same length 0.5 mm. Thus, the crack initiation of its length of 0.5 mm can be easily detected with the analysis of the strain waveform.
収録刊行物
-
- 日本機械学会論文集A編
-
日本機械学会論文集A編 60 (576), 1753-1760, 1994
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679423079552
-
- NII論文ID
- 110002371944
-
- NII書誌ID
- AN0018742X
-
- ISSN
- 18848338
- 03875008
-
- HANDLE
- 20.500.12000/219
-
- NDL書誌ID
- 3887631
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- IRDB
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可