書誌事項
- タイトル別名
-
- Application of Consolidation Method to the Recycling of Grinding Swarf of Bearing Steel.
- ベアリング コウ ケンサク カコウクズ リサイクル エ ノ アッシュク セイケイホウ ノ テキヨウ
この論文をさがす
抄録
This paper deals with the recycling of bearing steel grinding swarf by high-density consolidation. The grinding swarf was compacted at the pressing pressure from 98 to 588 MPa. The maximum density of 5.41 g/cm3 was obtained at the pressing pressure of 588 MPa. Metal recovery rate that is one of the most important factors in metal recycling depended on the density of the grinding swarf briquet. The metal recovery rate of about 90% was obtained at the density of 4.8 g/cm3. Chemical compositions of original bearing steel (SUJ 2) and recycled metals obtained from melting of grinding swarf briquets in air and Ar were evaluated.
収録刊行物
-
- 日本機械学会論文集Ａ編
-
日本機械学会論文集Ａ編 69 (679), 678-681, 2003
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679423133056
-
- NII論文ID
- 110002370359
-
- NII書誌ID
- AN0018742X
-
- ISSN
- 18848338
- 03875008
-
- NDL書誌ID
- 6516204
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可