書誌事項
- タイトル別名
-
- Estimation of Defect Sizes by Magnetic Leakage Flux Method.
- ロウエイ ジソク タンショウホウ ニヨル ケッカン スンポウ ノ ヨソク ホウ
この論文をさがす
抄録
We consider how to predict defect sizes, depth and width, from wave forms of the leakage flux obtained by the magnetic leakage flux method. Measurements of leakege flux were carried out using plane specimens with various values of depth and width of the defect and the lift off which is the distance between the specimen surface and the probe, and a quasi-weld reinforcement specimen. The absolute value of maximum leakage flux was affected by the plate thickness or the shape of reinfo cement not but by the defect shape. Therefore the absolute value method used by many researchers is not suitable for estimating the sizes of defect in a joint in which the average flux is not known. However, the wave form of leakage flux is almost unaffected by factors other than the defect sizes. The depth and width of the defect are estimated by the proposed method that the two feature points of the wave form, for example the maximum leakage flux and one-tenth of the maximum value, of experimental value are combined to the above feature points of the wave form calculated from the dipole modeling.
収録刊行物
-
- 日本機械学会論文集A編
-
日本機械学会論文集A編 63 (607), 584-588, 1997
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679423334016
-
- NII論文ID
- 110002374062
-
- NII書誌ID
- AN0018742X
-
- ISSN
- 18848338
- 03875008
-
- NDL書誌ID
- 4170502
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可