書誌事項
- タイトル別名
-
- Quantitative Evaluation of Effect of Artificial Small Defects on Torsional Fatigue Strength.
- ネジリ ヒロウ キョウド ニ オヨボス ジンコウ ビショウ ケッカン ノ エイ
この論文をさがす
抄録
In order to investigate the effect of artificial small defects on torsional fatigue strength of high strength steel, fatigue tests for a maraging steel (HV≅740) containing a small hole of diameter=100, 200, and 500μm were carried out. Torsional fatigue limit of the maraging steel was determined by the threshold condition of non-propagating cracks emanating either at the edge of hole or the smooth part of the specimens depending on the diameter of hole. The critical diameter of hole (dc) which does not influence torsional fatigue strength for several materials is between 100μm and 200μm regardless of hardness. Prediction equation for bending fatigue limit (σω) by the √(area) parameter model was extendedly applied to predict torsional fatigue limit (τω) for both smooth and holed specimens. The fatigue limits predicted by these method were in good agreement with the experimental results.
収録刊行物
-
- 日本機械学会論文集A編
-
日本機械学会論文集A編 64 (618), 271-277, 1998
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679423757440
-
- NII論文ID
- 110002374424
-
- NII書誌ID
- AN0018742X
-
- ISSN
- 18848338
- 03875008
-
- NDL書誌ID
- 4411587
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可