書誌事項
- タイトル別名
-
- Elasto-plastic Analysis on the Press Working with Increasing Thickness of Plate. A FEM Simulation of the Conical Shape Molding.
- プレス カコウ ニ カカワル ゾウニク セイケイ カテイ ノ ダンソセイ カイ
この論文をさがす
抄録
A new press working with increasing thickness for automobile parts was examined using elastoplastic FEM analysis. The main results were obtained as follows : (1) The mechanism of increasing thickness was determined by the FEM analysis parameter of strain. That is, the effect of increasing thickness of plate was achieved by increasing the strain in the circumferential direction. (2) The suitable press working of a piston-pulley was examined by means of FEM analysis. It was suggested the forming with increasing thickness. (3) A close agreement between the results of a proof test and analytical results was obtained. So it was confirmed that the new press working with increasing thickness of plate was useful in practice.
収録刊行物
-
- 日本機械学会論文集A編
-
日本機械学会論文集A編 63 (605), 132-137, 1997
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679423947776
-
- NII論文ID
- 110002373994
-
- NII書誌ID
- AN0018742X
-
- ISSN
- 18848338
- 03875008
-
- NDL書誌ID
- 4127077
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可